Powder paint thickness gauge

group name: Powder Coating Spare Parts

Min Order: 1 piece

brand name: HICOLO

model: CM8801FN

Nearest port for product export: Shanghai, Ningbo

Delivery clauses under the trade mode: FOB, CFR

Acceptable payment methods: T/T, PayPal, Westem Union

Export mode: Have the independent export and import right

update time: Wed, 29 Jul 2015 15:55:42 GMT

contact supplier

Paramtents

Condition new
Substrate Aluminum, iron,steel
Warranty 1year
After-sales Service Provided Engineers available to service machinery overseas
Range 0~1250μm

Packging & Delivery

Min Order1 piece

Briefing

all-in-one machine, easy to operate.

Detailed

Fe type is applicable for nonmagnetic coatings on ferromagnetic substrates, e.g., zinc, chromium, copper, tin, or paint, plastics, enamel on iron or steel.

A symbol Fe is displayed on the screen.

NFe type is applicable for electrically non-conductive coatings on non-ferrous metals, e.g., paint, enamel, or plastics on aluminum, brass, or zinc and anodic coating on aluminum.

A symbol NFe is displayed on the screen.

2 in 1 type combines two probes in one meter and automatically identify the substrate materials.

Depending on the substrate, the symbol Fe or NFe is displayed on the screen.

Operation Method:

Hold the gauge and push the integrated probe vertically against the costing surface turns on the power automatically and starts the measurement.

Keep the probe on the coating and hold it steadily for a while till the buzzer sounds, take up the gauge and read the measurement.

Power is automatically cut off in 30 seconds after measurement.

Unit of measurement:

Press the button "μm/mil" to switch between micron (μm) and mil.(mil).

Flip display:

Press the button "Flip" to turn the display upside down for easy reading when measurement is taking on top, side or bottom surfaces.

Data storage:

Press the button "M" to read the final 10 measurements, "0" displays at lower corner of LCD screen, the final 10 measurements can be shown in sequence by pressing the button "+/-".

Calibrations:

a. Zero calibration: press "+" for 2 seconds, "000" displays on the screen, then take a normal measurement on uncoated metals, the reading is calibrated to zero automatically.

b. Calibration with standard films: after measuring the calibration film, press "M" for 2 seconds, then adjust the reading to the right value by pressing "+/-", press "M" again to finish the calibration.

c. Restore factory defaults: press "-" for 2 seconds, "0, 00, 000 …" displays in sequence on the screen, the factory defaults are restored. The function is useful when standard films are not available for calibration.

Substrate blocks and standard films:

Available with the package for calibration or self test.

AAA alkaline cell:

Replace the battery cell when "

" is shown on the screen, otherwise the reading may not be accurate.

Specifications:

Range: 0~1250μm, 0~40 mils

Accuracy: ± (2μm +3%), ± (0.1 mils + 3%)