How to clean the powder coating gun
time2011/09/26
Cleaning powder spray gun can maintain and extend equipment life. Gun powder residue tend to stick in wet or humid climate which reduce the effective performance. Powder coating is a dry material, and the residue left in the gun, can be easily cleaned.
1, the gun will be ready in the powder coating the cleaned area. Lay a tarp under the gun to escape, the powder residue will not spread and stains.
2, pull out the powder spray gun powder coating. If the remaining voltage discharge gun. Touch the ground clip to discharge the gun fired.
3, unscrewed the cap Chamber of Commerce holds cup flour; powder container pour the remaining powder. Spray compressed air to clean the sewage outfall, twist tube, the deflector plates, cups and static control. Use no more than 30 pounds of compressed air.
4, twist off the deflector, and remove the three static tubes. Clean the tubes inside and outside - and diversion - using air compressor. Air compressors are usually removed pollen tube, but you can also use the engine to clean the powder spray gun.
5, spray directly onto the tube inside the air cleaner tubes. Reinstall the deflector and the static tube. Stored in a dry place for powder coating gun.
1, the gun will be ready in the powder coating the cleaned area. Lay a tarp under the gun to escape, the powder residue will not spread and stains.
2, pull out the powder spray gun powder coating. If the remaining voltage discharge gun. Touch the ground clip to discharge the gun fired.
3, unscrewed the cap Chamber of Commerce holds cup flour; powder container pour the remaining powder. Spray compressed air to clean the sewage outfall, twist tube, the deflector plates, cups and static control. Use no more than 30 pounds of compressed air.
4, twist off the deflector, and remove the three static tubes. Clean the tubes inside and outside - and diversion - using air compressor. Air compressors are usually removed pollen tube, but you can also use the engine to clean the powder spray gun.
5, spray directly onto the tube inside the air cleaner tubes. Reinstall the deflector and the static tube. Stored in a dry place for powder coating gun.